24/7 Emergency: 07706 303038
Repair Services

Ignition Repair & Replacement

Key won't turn, stuck in the ignition, or the steering lock is jammed? We diagnose and repair ignition faults on-site for cars, vans, and motorhomes — no recovery truck needed.

Common Ignition Problems We Fix

Ignition faults can leave you stranded without warning. Here are the most common issues we deal with every day.

Urgent

Key Won't Turn

The key goes in but won't rotate. Often caused by worn ignition wafers, a damaged key, or a seized steering lock. We can diagnose and fix this on-site.

Urgent

Key Stuck in Ignition

The key won't come out — either the ignition barrel has seized or there's an electrical issue preventing release. Don't force it; you could make it worse.

Urgent

Steering Lock Jammed

The steering wheel is locked and the key won't turn. This can be a mechanical fault in the steering lock mechanism. We repair or replace as needed.

Ignition Barrel Worn Out

Over time, the internal wafers and pins in the ignition barrel wear down, making it increasingly difficult to turn the key. We can recondition or replace the barrel.

Ignition Switch Fault

The key turns but nothing happens — no dash lights, no starter. This could be a faulty ignition switch rather than the barrel itself. We diagnose and replace.

Urgent

Key Broken in Ignition

The key blade has snapped off inside the ignition barrel. We extract the broken piece without damaging the barrel and can cut a replacement key.

On-Site Repair — No Recovery Truck Needed

If your ignition fails, a main dealer will almost certainly tell you to have the vehicle recovered to them — at your expense — and then charge dealership labour rates for the repair, which could take days.

We come to you. Our mobile workshop carries the specialist tools and replacement parts needed to diagnose and repair most ignition faults at your location — home, workplace, or roadside. Most repairs are completed within 1–3 hours.

No expensive vehicle recovery
No main dealer labour rates (£100+/hour)
No waiting days for an appointment
Same-day repair at your location
Full diagnosis before any work begins
Auto locksmith diagnosing and repairing a vehicle ignition barrel on-site

Save up to 60%

vs main dealer repair

Our Ignition Repair Process

1

Diagnose

We inspect the ignition barrel, key, steering lock, and electrical system to identify the exact fault — no guessing.

2

Quote

We give you a fixed price for the repair before any work starts. No hidden charges, no surprises.

3

Repair or Replace

We repair the existing ignition where possible, or fit a replacement if needed — all from our mobile workshop.

4

Test & Verify

We thoroughly test the repaired ignition and ensure your key works smoothly before we leave.

Warning Signs — Don't Ignore These

Ignitions rarely fail without warning. If you notice any of these, get it checked before it leaves you stranded.

The key feels stiff or resistant when turning
You need to jiggle or wiggle the key to get it to turn
The key sometimes turns without engaging the starter
The steering wheel lock doesn't release when you turn the key
The ignition feels 'gritty' or rough
The key is getting harder to insert or remove
The dashboard lights flicker or cut out when you turn the key
You hear clicking but the engine doesn't crank

If you're experiencing any of these symptoms, call us on 07706 303038 — early repair is always cheaper than an emergency callout.

Ignition Problem? We'll Come to You.

Don't pay for vehicle recovery and main dealer prices. We fix ignitions on-site across Bridlington and East Yorkshire — same day.

Same-Day Service
Fully Insured
Mobile — We Come to You